|
Written by Evan Hollins
|
|
Tuesday, 30 September 2014 17:23 |
|
A big rule change this year added the ability to use as big of a servo as possible while still staying under 5 amps per servo controller at stall. Unfortunately, many of the servos we commonly use didn't have documented stall currents. To find these, we contacted ServoCity™ and asked them what to do. They were able to talk to HiTec© and retrieve stall currents for many of the servos that they make. Here they are in a table shown below. We would like to thank ServoCity and HiTec for helping not just us but all of FTC! For Analog Servos: SERVO | | STALL CURRENT @ 4.8V | STALL CURRENT @ 6V | | | | | | HS-35 | | 360mA | 430mA | HS-40 | | 460mA | 580mA | HS-45 | | 440mA | | HS-53 | | 440mA | 550mA | HS-55 | | 440mA | 550mA | HS-65 | | 960mA | 1200mA | HS-70 | | 960mA | 1250mA | HS-81/82 | | 1450mA | 1800mA | HS-311 | | 700mA | 800mA | HS-322 | | 700mA | 800mA | HS-485 | | 1000mA | 1200mA | HS-625 | | 1600mA | 2000mA | HS-645 | | 1600mA | 2000mA | HS-755 | | 1500mA | 1800mA | HS-765 | | 1500mA | 1800mA | HS-785 | | 1500mA | 1800mA | HS-805 | | 4800mA | 6000mA | HS-1425CR | | 640mA | 800mA |
For Digital Servos: SERVO | | STALL CURRENT @ 4.8V | STALL CURRENT @ 6V | HS-5035 | | 360mA | 430mA | HS-5055 | | 500mA | 700mA | HS-5065 | | 960mA | 1200mA | HS-5070 | | 1000mA | 1300mA | HS-5085 | | 1700mA | 2150mA | HS-5087 | | | 1450mA | HS-5485 | | 1000mA | 1200mA | HS-5495/96 | | 1200mA | 1400mA | HS-5565 | | | 2100mA | HS-5585 | | | 2100mA | HS-5625/45 | | | 2100mA | HS-5665/85 | | | 2100mA | HS-7235/45 | | | 1300mA |
|
|
Last Updated on Tuesday, 30 September 2014 21:29 |
