Cougar Workshop Bot PDF Print E-mail
Written by The Cougars   
Tuesday, 07 September 2010 06:50

We've designed a Cougar Workshop Bot.  And the Incredibots have designed an EV3 version.  It's a simple robot designed just for the workshop.  So If you don't already have a robot for the workshop try this one.  You should be able to build it in about 1/2 an hour.  It's the simplest robot we could come up with that could do ALL of the labs.  It's only got 79 parts plus 6 wires.  With 2 light and 2 touch sensors appropriately located you can try out the back-to-wall and advance-to-line programs.

The LEGO Digital Designer file is attached to this article and the printed building instructions are here

And a new EV3 version of the printed building instructions are here. 

Wire as follows:

Left Motor -> B

Right Motor -> C

Left-Front Light Sensor -> 1

Right-Front Light Sensor -> 4

Left-Rear Touch Sensor -> 2

Right-Rear Touch Sensor -> 3

Attachments:
Download this file (Cougar Workshop Bot.lxf)Cougar Workshop Bot.lxf[A simple easy to build robot that is a great start for learning to use sensors on an FLL field.]16 Kb18/09/11 22:06
Download this file (EV3 Robot.lxf)EV3 Cougar Workshop Bot[ ]14 Kb15/09/14 19:56
Download this file (EV3_Workshop_Robot.pdf)EV3_Workshop_Robot.pdf[ ]4298 Kb17/09/14 07:59
Download this file (NXT_Workshop_Robot.pdf)NXT_Workshop_Robot.pdf[ ]1575 Kb17/09/14 07:58
Last Updated on Wednesday, 17 September 2014 07:59
 
Copyright © 2018 cougarrobot.com. All Rights Reserved.
Joomla! is Free Software released under the GNU/GPL License.